2025年12月22日 星期一

日股複委託標的

 

下面是 適合透過複委託買進、成本相對較低的日本 ETF / J-REIT ETF(東京證交所上市) 推薦清單(含基本重點與費用方向),適合用日幣在玉山複委託上直接交易:


📌 一、日本市場整體與股票型 ETF(低費用核心指數)

🟡 1. iFreeETF-TOPIX / Nikkei225 系列(代表日本整體市場)

雖然這類具代表性的 ETF 有很多,但有些以 超低管理費 著稱:

🔎 範例(日本內低費用 ETF)

  • iFreeETF TOPIX 相關 ETF

  • iFreeETF Nikkei225 相關 ETF

📌 根據之前的報導:

這些 ETF 中某些費用率非常低,例如 TOPIX ETF 可能只有 0.06%、Nikkei225 約 0.12% 的費用率,是日本股市指數型 ETF 中的低成本選擇。etfstrategy.com

👉 適合用來做「日本整體股市」核心配置
📌 ETF 代碼通常為 26xx.JP 類型(可在券商系統查詢)


📌 二、高股息 / 特色股票型 ETF

🟡 2. iShares MSCI Japan High Dividend ETF(1478.JP)

  • 跟蹤高股息策略的日本股票指數

  • 費用率約 0.19%(低於一般主動型 ETF)etfstrategy.com

👉 適合想追 股息收益+日本大盤 但費用不太高的 ETF


📌 三、J-REIT ETF(不動產投資信託 ETF)

J-REIT ETF 主要是把日本上市的房地產投資信託集合成一檔 ETF,提供房地產股息收益與市場多元性。

🟠 3. iShares Core Japan REIT ETF(1476.JP)

  • 費用率約 0.15%(日本本地 J-REIT ETF 的低成本代表)

  • 配息率高,長期為一種配息型投資工具。MoneyDJ

👉 適合作為 日本不動產收益核心配置


🟠 4. NEXT FUNDS Tokyo Stock Exchange REIT Index ETF(1343.JP)

  • 大型 J-REIT 指數型 ETF

  • 費用率約在 0.17% 左右(含稅)

  • 投資主流日本 REIT 市場,流動性較好。玉山證券

👉 很適合做為 分散式房地產 ETF 配置


🟠 5. 其他 J-REIT ETF 選項

若想分散不同主題或類型,可以考慮類似以下的 ETF(視券商是否報價):

  • Global X Residential J-REIT ETF(2097.JP) — 住宅型 REIT ETF

  • Global X Logistics J-REIT ETF(2565.JP) — 倉儲物流型 REIT ETF

  • Global X Green J-REIT ETF(2855.JP) — 環保/綠色不動產聚焦

📌 這些都是 主題性 J-REIT ETF,具特色曝險,費用率會比核心 ETF 稍高一些。Global X Japan+1


📌 四、ETF / J-REIT ETF 的選擇策略

🔎 核心 vs 配息策略

📌 核心股票 ETF(例如 TOPIX / 日經相關)
✔ 費用極低
✔ 適合追蹤日本整體股市
✔ 長期波動與成長為主

📌 高股息 ETF(如 1478.JP)
✔ 更偏重股息策略
✔ 費用仍算低

📌 J-REIT ETF(例如 1476.JP、1343.JP)
✔ 偏重租金收益、資產類收益分配
✔ 配息率通常高於股票 ETF


📌 五、可在複委託上操作的建議步驟

  1. 先在玉山證券系統搜尋 ETF 代碼(例如輸入 1476.JP 或 1343.JP)
    📌 有報價就能交易

  2. 設定好交割幣別(日圓)
    📌 用日圓直接下單,可減少匯差

  3. 長期配置比短線更省成本
    📌 複委託手續費常為 0.5–1% 單邊,適合長期持有


📌 小提醒

✔ 費用率是影響長期報酬最核心因素之一
✔ 日本 ETF / J-REIT 費用率通常比主動型基金低很多
✔ 費用率資訊會隨基金更新,正式投資前請再確認券商報價及基金官方資訊

2025年11月19日 星期三

windows using up C drive

 

The most common reasons why ntoskrnl.exe (the Windows kernel) causes constant disk access and fills up your C: drive are system-level logging, memory dumps, or runaway services like Windows Search or Superfetch.

Here’s a breakdown of what might be happening and how to investigate:


🧠 Possible Causes of Disk Usage by ntoskrnl.exe

  1. Memory Dump Files (e.g., MEMORY.DMP)

    • After a crash or BSOD, Windows may write a full memory dump to C:\Windows\MEMORY.DMP, which can be several GB in size.
    • Check: Open C:\Windows and sort by size to see if MEMORY.DMP or similar files are growing.
  2. Windows Error Reporting Logs

    • Located in C:\ProgramData\Microsoft\Windows\WER, these can accumulate if error reporting is frequent and not cleaned up.
  3. Windows Search Indexing

    • The SearchIndexer.exe service can cause heavy disk I/O, especially after updates or if many files are added.
    • Try disabling Windows Search temporarily:
      net stop "Windows Search"
      
  4. Superfetch / SysMain Service

    • This service preloads frequently used apps into memory but can cause high disk usage.
    • Disable it via:
      sc stop "SysMain"
      sc config "SysMain" start=disabled
      
  5. System Restore Points

    • Windows may be creating frequent restore points, consuming disk space.
    • Check via: Control Panel > System > System Protection > Configure
  6. Windows Update Cache

    • Updates are stored in C:\Windows\SoftwareDistribution\Download. These can grow large and are safe to clean up.
  7. Third-party Drivers or Antivirus

    • Some drivers (especially GPU or storage-related) or antivirus software may cause ntoskrnl.exe to behave abnormally.
    • Try a clean boot to isolate the issue:
      • Disable all non-Microsoft services via msconfig
      • Disable startup items in Task Manager

🛠️ What You Can Do

  • Run Disk Cleanup: Use cleanmgr and select system files to remove old updates, dumps, and logs.
  • Check with Resource Monitor: Open resmon.exe, go to the Disk tab, and see which files are being accessed most.
  • Use Process Explorer: Download from Microsoft Sysinternals to inspect what ntoskrnl.exe is doing.
  • Run DISM and SFC:
    DISM /Online /Cleanup-Image /RestoreHealth
    sfc /scannow
    

If you'd like, I can walk you through using Process Monitor to trace exactly which files are being written by the system process. That would give us a precise answer. Would you like to try that?